Home > Hardware > 9.5mm rubber grommet

9.5mm rubber grommet

Individual nuts, washers, screws, etc - the hardware that holds your amp together

First: I strongly encourage you to look at my ready-made hardware packs as they may help you save money (not to mention my time!), but if you want to choose individual items of hardware, this is the right page.
      The parts cover M3 and M4 screws, shakeproof washers, nuts, etc for assembling your amp. They are sized and specced for their typical tasks:
* M2.5 and M3 for valve sockets and board mounting (some people find that the valve sockets mount more easily with M2.5 screws than M3)
* M3 for turret board mounting
* M3 with countersunk (CS) screws for IEC socket mounting
* M3 spacers for board mounting (several varieties shown in the photos).
* M4 for transformers and solder lugs
* M6 screws (30mm long) and cage nuts for chassis mounting
* Rubber grommets for thru-chassis wiring

Hardware packs (above) can save money but you can also buy individual items separately

Price & ordering

The following items are all priced at 5p each:
* M2.5 screw, nut (use with M3 washer)
* M3 screw, washer or nut
* M3 CS screwt
* M3 F+F hex spacer
* M3 insulated F+F spacer
* M4 screw, washer or nut
* M4 solder lug
* 6.35mm rubber grommet
* 9.5mm rubber grommet
The other items are priced at 15p each:
* M3 M+F hex spacer
* M6 screw
* M6 cage nut

The M+F spacer has one male end, one female end and a 10mm-long hex body

The F+F hex spacer has two female ends and a 10mm long hex body

The insulated F+F spacer has a 25mm-long nylon body and two female ends
Price: £0.05
inc VAT
NOTE: Amp Maker is closed for a whole year, reopening in Autumn 2019. See Home page for details.