Home > Guitar amp kits > P1800 plexi amp

P1800 plexi amp

18W plexi amp kit, with single-ended and push-pull tones and VVR

The P1800 guitar amplifier kit is the replacement for the very popular PP-18 amp kit. That means that at its heart is the same Dominator/18W tone. In adding features to the amp kit, I've made sure to keep the 18W signal path intact, so all of the same classic tones are available. The new features just add more tonal variety and more flexibility to the circuit. As a bonus, there's also more scope for tone tweaking.


Changes and improvements

The classic 18W circuit has two inputs, one Volume knob and a single Tone control for dialling down treble frequencies. Starting at the beginning of the signal path, here are the additional features of the P1800:
Cascaded inputs: The Hot input now runs the two preamp stages in series to provide more overdrive. The Normal input provides the classic 18W signal path.
Treble control Exactly the same position and effect as the standard 18W amplifier's Tone control, just renamed.
Bass switch: Off (down) when you want the pure 18W signal path; On (up) to add a bass tone control (especially useful when using the Hot input).
Bass control A simple and effective way of controlling the amp's bottom end to avoid 'flubby bass'.
Output switch: A four-position switch that controls the signal to the power valves. SE to drive just one power valve for single-ended output; PP driving both power valves for the classic 18W push-pull tone; PP+ just like PP, but with a smoother tone; Mute to replace the conventional Standby switch.
Power: This controls the VVR circuit and lets you dial the fully-cranked output down to well under 1W for quiet home use

Ease of building

The P1800's new features add some extra complexity compared to the old PP-18. On a complexity scale of 1-5, the P1800 rates as a '3' (where the original PP-18 was a '2' and the WF-55 is a '1', for example). The online construction manual shows how to build the amplifier step-by-step.

Pricing and versions

The P1800 comes in one version, which includes the pre-punched chassis, front and rear control panels as well as transformers, turret boards, all electronic components, hardware for assembly and wire for connections. You can also choose to add valves (if you don't already have them, you will need two ECC83s and two EL84s).
NOTE: The P1800 is temporarily out of stock while I take more time for research on new products. I don't have an email notification system, so please keep an eye on this page for details of when this amp kit will be back on sale.

InfoCentre links:



P1800 specifications
+ All-valve signal path
+ 0-18W output
+ single-ended/push-pull output
+ Hand-wired turret board
+ Volume and Power level controls
+ Treble and Bass controls
+ 8/16 ohm speaker outputs
+ 120/240V mains


Choose your control knobs...
Black chickenhead knobs
Marshall-style knobs
Black barrel knobs
Valves required
ECC83 x2(+£18.00)
EL84 x2(+£18.00)
Price: £260.00
inc VAT
Product is temporarily out of stock.