Amber neon indicator
Round neon power indicator, chassis-mounting, 240V
This is a 220-240V AC neon indicator (i.e. one you power directly from the On/Off switch instead of the power transformer’s 6.3V secondary winding). It has two solder lugs, and comes with a spring washer and hex nut for securing to the front panel. I also stock the red version.
Dimensions & info
This neon indicator requires a 10mm diameter hole in the control panel and chassis. If you have a pre-punched chassis with 9.5mm holes, you may be able to screw the neon into the hole using the thread.