Paul’s plexi stack

“Wonderful amp, great success. I’m very happy, a truly wonderful project, great design. The only problem is some of the red sharpy pen I used to draw out the inside of the tolex is leaching through to the top vent, and the hole I cut in the front of the cabinet is slightly too big and cuts off the text on the plexiglass, never mind.

“I built the amp very slowly and checked everything as I went along, then checked again, and again before soldering. I had previously sorted through all the components and labelled each one with masking tape, the part number and specification. I was able to put the amp straight into the cabinet and play it. Marvellous, remarkably different tone to what I’m used too!! The sound is really great, thanks a million.”